Floor Repairs & Maintenance — Central Coast NSW
Gap filling, board replacement, squeak repair and maintenance coats — targeted repairs that extend the life of your timber floors.
Floor Repairs & Maintenance
Not every floor needs a full sand. If your timber is fundamentally sound but has specific problems — gaps between boards, a few damaged planks, annoying squeaks, or a worn-through coating in high-traffic areas — targeted repairs are often a fraction of the cost of starting from scratch. Bay's can assess what your floor actually needs rather than recommending the most expensive option.
Gap filling
Gaps between boards are normal as timber moves with seasonal humidity changes. We use flexible gap fillers matched to your timber colour — rigid fillers crack and fall out; the right product stays put. For wider gaps, custom-cut timber strips give the most natural result.
Board replacement
Damaged, cupped, cracked or water-stained boards can usually be replaced individually without touching the rest of the floor. We source matching timber, replace the affected boards and blend the finish. Where an exact match isn't available, we can restain to even out the colour.
Squeak repair
Floor squeaks are caused by boards or sub-floor elements moving against each other. In most cases we can fix squeaks without lifting boards — screwing down from above, filling movement gaps with appropriate compounds, or accessing from below if there's a sub-floor cavity. We'll tell you upfront what's achievable.
Maintenance coats & recoats
If your coating is worn or dull but the timber underneath is still in good shape, a maintenance recoat (light screen and single fresh coat) can restore the look without a full sand. Far less disruption and cost. Works best when done before the existing coating is fully gone — once bare timber is exposed to foot traffic, a full sand is usually unavoidable.
- Flexible gap filling in matched colours
- Custom timber strip gap repair for wider gaps
- Individual board replacement and colour blending
- Squeak repair — surface or sub-floor methods
- Maintenance recoats — screen and single coat
- Spot sanding and refinishing for localised damage
- Stair tread repair and replacement
Send Gavin a photo of the problem area and he'll give you an honest assessment of what's needed. Call 0414 568 736 or use the contact form.
